How to Setup Static IP for Xbox 360 on Dlink DIR-822

This guide will show you everything you have to do to set up a static IP address for your Xbox 360 using your Dlink DIR-822

How to set up static IP for Xbox 360 on Dlink DIR-822

1. First, launch your Xbox 360 console.
2. Now open Xbox Guide and move to the Settings card.
3. Select System Settings part. 
4. Pick Network Settings and choose the Wired Network section.
5. Then from the list press on IP Settings and pick Configure Network.
6. Click on Manual and next on IP Address.
7. Now enter the IP address that you need and press the Done button.
8. Go to the Subnet Mask, enter the address and again confirm by Done key.
9. Choose Gateway card, write the Gateway address and click on the Done.
10. Lastly, accept all changes by the Done.
11. Well done! You set a static IP address for your Xbox 360.

Setting up static IP for Xbox 360

1. Start by opening your router's control panel.
2. Press on the More Functions section.
3. Choose Network Settings from the list and click on the LAN tab.  
4. Scroll down the page. 
5. Press on Add button. 
6. Now enter the MAC address of your Xbox One. 
7. Then write the IP address assigned to your Xbox One console. (Make sure that this address is within your router's DHCP range) 
8. Finally, click on the OK. 
9. Great! The static IP was successfully set up. 

https://www.hardreset.info/devices/dlink/dlink-dir-822/faq/set-static-ip-xbox-360/set-static-ip-xbox-360-huawei/